Documents and Drawings for: 1376352-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025(0.64)/375(9.5) HYBRID CONNECTOR (tif, Japanese)

Qualification Test Report

501-5495

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025 SERIES I/O CONNECTOR 8POSITION PLUG HOUSING ASSEMBLY (pdf, English)

Customer Drawing

1376352

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025(0.64)/375(9.5) HYBRID Connector (pdf, English)

Instruction Sheet (non U.S.)

411-78005

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025(0.64)/375(9.5) HYBRID Connector (pdf, English)

Instruction Sheet (non U.S.)

411-78005-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025 G Wire to Wire Connector (tif, Japanese)

Instruction Sheet (non U.S.)

411-78011

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025 G Wire to Wire Connector (tif, Japanese)

Instruction Sheet (non U.S.)

411-78011-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025(0.64)/187(4.8) I/O CONNECTOR (tif, Japanese)

Instruction Sheet (non U.S.)

411-78123

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025(0.64)/187(4.8) I/O CONNECTOR (tif, Japanese)

Instruction Sheet (non U.S.)

411-78123-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

See all product compliance on the Product Detail Page

Instruction Sheet (non U.S.)

411-78145-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

Customer View Model (2d_dxf.zip, English)

Model

1376352-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

Customer View Model (3d_stp.zip, English)

Model

1376352-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

Crimping of 025 Receptacle Contact (pdf, Japanese)

Application Specification

114-5250

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025G CONNECTOR WIRE-TO-WIRE TERMINATION (pdf, Japanese)

Qualification Test Report

501-5409

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

See all product compliance on the Product Detail Page

Instruction Sheet (non U.S.)

411-78145

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025 SERIES I/O CONNECTORS (H-Type V-Type 2Row, Wire to Wire) (pdf, Japanese)

Product Specification

108-5668-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025(0.64)/375(9.5) HYBRID Connector (pdf, Japanese)

Product Specification

108-5773

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025 G W-W CONNECTOR (pdf, Japanese)

Product Specification

108-5787

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025 G W-W CONNECTOR (pdf, Japanese)

Product Specification

108-5787-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

See all product compliance on the Product Detail Page

Product Specification

108-78295-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

025 SERIES I/O CONNECTORS (H-Type, V-Type 2Row) (pdf, Japanese)

Instruction Sheet (non U.S.)

411-5928-1

Documents and Drawings for: 1376352-1

Difficulty Viewing PDF Images In Browser

Difficulty Viewing TIF Images In Browser

TE Part Number: 1376352-1

Your Resources

Find Documents, Drawings, & 3D CAD Models

Results

Documents and Drawings for: 1376352-1

Difficulty Viewing PDF Images In Browser

Difficulty Viewing TIF Images In Browser

TE Part Number: 1376352-1