Documents and Drawings for: 173681-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

Crimping .040 Series, Receptacle Contact (tif, Japanese)

Application Specification

114-5094

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 Series Multilock I/O Connector Mark II (pdf, Japanese)

Customer Manual (non U.S.)

412-5475

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 Multi Lock Connector (pdf, English)

Qualification Test Report

501-5041

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 Multi-Lock Connector (Non Inertia Type) (pdf, English)

Qualification Test Report

501-5063

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

040 Series Multi-lock Connector wire to wire (pdf, Japanese)

Qualification Test Report

501-5790

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

Customer View Model (3d_igs.zip, English)

Model

173681-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

Customer View Model (2d_dxf.zip, English)

Model

173681-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

040 SERIES RECEPTACLE CONTACT (pdf, English)

Customer Drawing

173681

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 SERIES MULTI LOCK I/O CONNECTOR (NON INERTIA TYPE) (pdf, English)

Product Specification

108-5318

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 SERIES MULTI LOCK I/O CONNECTOR (NON INERTIA TYPE) (tif, Japanese)

Product Specification

108-5318

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 Series Multi-Lock I/O Connector (.040 ML I/O) (pdf, English)

Product Specification

108-5470

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 Series Multi-Lock Connector (wire to wire)(.040 MLC) (tif, Japanese)

Product Specification

108-5471

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 Multilock Connector (UL 94 V-0) (pdf, English)

Product Specification

108-5516

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 Multilock Connector (UL 94 V-0) (tif, Japanese)

Product Specification

108-5516

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

DESIGN OBJECTIVES OF 040MLC CONNECTOR(2PIECES-TYPE) (tif, English)

Specification Or Standard

108-5797

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

INSTRUCTION SHEET OF 040MLC CONNECTOR(2PIECE-TYPE) (tif, English)

Specification Or Standard

411-78020

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 Series, Multilock I/O Connector, Mark II (pdf, Japanese)

Customer Manual (non U.S.)

412-5475-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

HYBRID I/O CONNECTOR (tif, English)

Customer Manual

412-5476

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

HYBRID I/O CONNECTOR (tif, English)

Customer Manual

412-5476-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

040 Series Multi-Lock Connector (Wire to Wire type) (pdf, Japanese)

Qualification Test Report

501-5292

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040 SERIES MULTI-LOCK CONNECTOR (.040 ML I/O) (pdf, Japanese)

Product Specification

108-5244

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

.040/.070 Hybrid I/O Conn. For Printed Circuit Board (pdf, English)

Product Specification

108-5280

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

040 Series Multi-Lock Connector wire to wire type (pdf, Japanese)

Product Specification

108-5352

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

040 Series Multi-Lock Connector wire to wire type (pdf, Japanese)

Product Specification

108-5352-1

Please carefully read the disclaimer before using any of this data. Your use of this data constitutes your acceptance of the terms and conditions set forth below. If you do not agree to those terms and conditions, please click on the I Disagree link.

This information has been provided to you free of charge for your use but remains the sole property of Tyco Electronics Corporation. While Tyco 
Electronics has used reasonable efforts to ensure its accuracy, Tyco Electronics does not guarantee that it is error-free, nor makes any other representation, warranty or guarantee that the 
information is completely accurate or up-to-date. In many cases, the CAD data has been simplified to remove proprietary detail while maintaining critical interface geometric detail for use by
customers. Tyco Electronics expressly disclaims all implied warranties regarding this information, including but not limited to any implied warranties or merchantability or fitness for a particular
purpose.

Tyco Electronics will in no case be liable for your use, or the results of your use, of the CAD models or any accompanying written materials. IT IS YOUR RESPONSIBILITY TO VERIFY THE 
RESULTS OF YOUR USE OF THIS INFORMATION IN YOUR OWN PARTICULAR ENGINEERING AND PRODUCT ENVIRONMENT AND YOU ASSUME THE ENTIRE RISK OF DOING SO OR 
FAILING TO DO SO.

In no event will Tyco Electronics or its contractors, directors, officers, employees, affiliates or distributors be liable for any direct, indirect, special, incidental or consequential damages (including 
but not limited to, damages for lost business, lost profits, business interruptions and loss of information) arising from your use of, or your inability to use the CAD models or any accompanying written 
materials, even if Tyco Electronics has been advised of the possibility of such damages. In no event will Tyco Electronics' liability to you for any cause whatsoever, and regardless of the form of 
action, exceed $500.

No oral or written information of advice given by Tyco Electronics or its distributors, agents or employees will operate to create any warranty or guarantee or vary any provision or information 
herein, and you may not rely on any such information or advice. Tyco Electronics reserves the right to change any portion of this data at any time without notice.

Do you agree to the terms & conditions?

I Agree | I Disagree

MULTILOCK Connector System (pdf, English)

Catalog Section

1654355_MULTILOCK

Documents and Drawings for: 173681-1

Difficulty Viewing PDF Images In Browser

Difficulty Viewing TIF Images In Browser

TE Part Number: 173681-1

Your Resources

Find Documents, Drawings, & 3D CAD Models

Results

Documents and Drawings for: 173681-1

Difficulty Viewing PDF Images In Browser

Difficulty Viewing TIF Images In Browser

TE Part Number: 173681-1