Application
Solutions for SAE J1939 Specifications
TE provides connector and sensor options that are specifically designed to meet CAN systems under the SAE J1939 standard.
Anything that can be measured and controlled electronically can be monitored and directed by a CAN system. CAN systems, or Controller Area Networks, are multiplex data systems. Multiplexing allows multiple data signals to travel on the same wires, integrating separate electronic systems and applications to a single point control and monitoring system. Using signals sent over a serial network, CAN systems provide instantaneous monitoring of diagnostic and control systems. The SAE J1939 is a specific type of CAN that defines the communications pathways for vehicle networks serving the automotive and diesel engine markets. TE offers the DEUTSCH DT, DTM, HD10, HD30 and HDBox connector options to meet the J1939 standards.
Surface Mount Resistors
A surface mount resistor is a tiny rectangular ceramic body with silver conductive edges on either end. They provide the same functionality as the more traditional axially leaded resistors but has a lower power dissipation capacity and oftentimes a lower stray inductance and capacity.
DTM Connectors
DTM connectors are the answer to all of your smaller wire gauge applications. The DTM connectors offer the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell. Suitable for J1939 including -15.
Through-Hole Resistors
A through-hole resistor is a fixed resistor that has long, pliable leads that can be stuck into a breadboard or hand- or wave-soldered into a printed circuit board. A through-hole resistor is used to reduce the flow of electrical current within a circuit. It’s commonly composed of carbon film, metal film, metal oxide film, thick film, or wirewound.
HD30 Connectors
The HD30 features include quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals, and a rear insertion/rear removal contact system. Suitable for J1939 including -12.
HD10 Series
The HD10 is an environmentally sealed, thermoplastic cylindrical connector series and offers arrangements from 3 to 9 cavities. All HD10 connectors are available either in-line or flanged and accept size 12 or 16 contacts, or a combination of size 16 and size 4 contacts. Suitable for J1939 including -13,
Whether you’re building a Controller Area Network for anything from on/off-highway, construction, material handling, agriculture machines, or your OEM fleet of fire engines, there is a TE DEUTSCH solution for your CAN needs.
TE Connectivity (TE) is a world leader in supporting today’s increasingly complex and sophisticated equipment and applications. Our comprehensive portfolio of rugged sensors, terminals, connectors, relays, and hybrid and electric mobility solutions are designed to withstand the harsh conditions of the on-highway industry.
J1939 Sensors
Featured Products with CAN J1939 Output Signal
-
SK Series String Potentiometer
Available in both 250 and 400-inch stroke ranges, the SKJ series CANJ1939 IP67 string potentiometer is designed and manufactured for various applications and offers a CANBus output signal for simple integration.
-
AXISENSE Gyro-Tilt Sensor
The AXISENSE-2 CAN J1939-90 tilt sensor is a dual axis tilt sensor with a focus on platform leveling, dynamic engine management, tip-over protection, and tilt alarm.
-
TRICAN Digital RH Temperature Pressure Sensor
The TRICAN HTD2800 sensor provides digital output signals for relative humidity, temperature and pressure from a single device.
Application
Solutions for SAE J1939 Specifications
TE provides connector and sensor options that are specifically designed to meet CAN systems under the SAE J1939 standard.
Anything that can be measured and controlled electronically can be monitored and directed by a CAN system. CAN systems, or Controller Area Networks, are multiplex data systems. Multiplexing allows multiple data signals to travel on the same wires, integrating separate electronic systems and applications to a single point control and monitoring system. Using signals sent over a serial network, CAN systems provide instantaneous monitoring of diagnostic and control systems. The SAE J1939 is a specific type of CAN that defines the communications pathways for vehicle networks serving the automotive and diesel engine markets. TE offers the DEUTSCH DT, DTM, HD10, HD30 and HDBox connector options to meet the J1939 standards.
Surface Mount Resistors
A surface mount resistor is a tiny rectangular ceramic body with silver conductive edges on either end. They provide the same functionality as the more traditional axially leaded resistors but has a lower power dissipation capacity and oftentimes a lower stray inductance and capacity.
DTM Connectors
DTM connectors are the answer to all of your smaller wire gauge applications. The DTM connectors offer the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell. Suitable for J1939 including -15.
Through-Hole Resistors
A through-hole resistor is a fixed resistor that has long, pliable leads that can be stuck into a breadboard or hand- or wave-soldered into a printed circuit board. A through-hole resistor is used to reduce the flow of electrical current within a circuit. It’s commonly composed of carbon film, metal film, metal oxide film, thick film, or wirewound.
HD30 Connectors
The HD30 features include quick connect-disconnect bayonet coupling, single hole bulkhead mounting, silicone seals, and a rear insertion/rear removal contact system. Suitable for J1939 including -12.
HD10 Series
The HD10 is an environmentally sealed, thermoplastic cylindrical connector series and offers arrangements from 3 to 9 cavities. All HD10 connectors are available either in-line or flanged and accept size 12 or 16 contacts, or a combination of size 16 and size 4 contacts. Suitable for J1939 including -13,
Whether you’re building a Controller Area Network for anything from on/off-highway, construction, material handling, agriculture machines, or your OEM fleet of fire engines, there is a TE DEUTSCH solution for your CAN needs.
TE Connectivity (TE) is a world leader in supporting today’s increasingly complex and sophisticated equipment and applications. Our comprehensive portfolio of rugged sensors, terminals, connectors, relays, and hybrid and electric mobility solutions are designed to withstand the harsh conditions of the on-highway industry.
J1939 Sensors
Featured Products with CAN J1939 Output Signal
-
SK Series String Potentiometer
Available in both 250 and 400-inch stroke ranges, the SKJ series CANJ1939 IP67 string potentiometer is designed and manufactured for various applications and offers a CANBus output signal for simple integration.
-
AXISENSE Gyro-Tilt Sensor
The AXISENSE-2 CAN J1939-90 tilt sensor is a dual axis tilt sensor with a focus on platform leveling, dynamic engine management, tip-over protection, and tilt alarm.
-
TRICAN Digital RH Temperature Pressure Sensor
The TRICAN HTD2800 sensor provides digital output signals for relative humidity, temperature and pressure from a single device.
