Server Solutions

PCIe Gen 5 CEM (Card Electromechanical) connectors can enable all generations of PCI Express signaling, Data rate can reach up to 32 GT/s, Having the same mating interface and footprint with PCIe previous connectors.

Our new Sliver internal cabled interconnect system provides a solution to data rate increase challenges. It is flexible, robust and provides optimal signal integrity – while also saving space and lowering design costs.

Increasing bandwidth demands require better-performing high speed connectors. TE’s assortment of 6.25 – 25+ Gbps backplane interconnects provides the connections needed to keep data flowing.

A surface mount resistor is a tiny rectangular ceramic body with silver conductive edges on either end. They provide the same functionality as the more traditional axially leaded resistors but has a lower power dissipation capacity and oftentimes a lower stray inductance and capacity.

TE's pluggable I/O connector and cages support Fibre Channel, InfiniBand and Ethernet standards in QSFP+, SFP+ and other interfaces for data rates up to 100G.

A through-hole resistor is a fixed resistor that has long, pliable leads that can be stuck into a breadboard or hand- or wave-soldered into a printed circuit board. A through-hole resistor is used to reduce the flow of electrical current within a circuit. It’s commonly composed of carbon film, metal film, metal oxide film, thick film, or wirewound.

TE’s cable assemblies transmit power, video, audio, RF, high-speed data or can even provide lightning protection.

Our wide variety of power connector types, specialty cabling and bussing, and superior design capabilities are the right match for your unique application.

Tactile switches provide tactile feedback to the user when the switch or button makes contact with the control panel underneath, which is usually a printed circuit board.

A DIP switch is a manual electronic package that is composed of a series of tiny switches. It has a rectangular casing and two parallel rows of connecting terminals. A SIP switch is a computer chip package that has a single row of connection pins.

Land grid array (LGA) sockets provide compressive electrical interconnect between the processor and the printed circuit boards (PCBs). As computing power increases, so does the chips' pin counts. A robust bolster plate provides a reliable interconnection to the microprocessor package and limits PCB bowing during compression to ensure a reliable connection.