Intelligent & Innovative Lighting Solutions

LUMAWISE Endurance N+ network lighting control accessories include an ANSI C136 compliant base assembly with an integral seal gasket. These new covers include a variety of two sizes, 58.6mm and 117.0mm in light gray, smoke gray, and clear

The Endurance S Zhaga Book 18 connector system enables D4i controlled Zhaga Book 18 compliant luminaires while the Endurance S keyed connector system enables non-Book 18 applications like Z10. Extending from the Endurance S portfolio is the S2 receptacle. 

Our LUMAWISE ALR series street lighting photocells are ANSI C136.10 compliant photo controls offering an economical and reliable means of controlling lighting systems from dusk to dawn. These products are engineered specifically to enhance lighting system performance and enable energy savings. 

TE Connectivity (TE)’s LUMAWISE Motion sensor is a motion sensor designed for street lighting. Enabling energy savings from dimming or even turning off a luminaire, while still being able to react to motion and bring a luminaire to full brightness for safety and security reasons.

TE’s LUMAWISE Power Input Terminal Block (TB) offers a unique, highly engineered wire termination alternative to traditional terminal blocks utilized in LED outdoor lighting luminaires and HID (High Intensity Discharge) luminaires that include HPS(High Pressure Sodium) and MHL (Metal Halide Lamps) that are rapidly transitioningto LED luminaires. 

TE Connectivity (TE)’s NECTOR T Pluggable connectors provide an easy-to-use, pluggable power-distribution connector-cabling system, suited for moist and wet environments (sealed IP68). 

NECTOR S connectors are engineered to reduce installation time in nearly any indoor lighting installation through a round, small form design.

Circular plastic connectors (CPC) are lightweight, all-plastic and metal-shell connectors. They have quick connect/disconnect capability with thread assist, positive dent coupling.

Corcom filters are recognized worldwide for providing EMI/RFI filtering solutions. TE offers an expanded catalog of over 70 Corcom filter series that are suitable for a wide range of applications across multiple industries. 

Our SlimSeal Miniature series connector is a dust and waterproof, IP67-rated connector available in two and three position configurations. A robust press-to-release spring latch helps secure connector mating. 

TE Connectivity (TE)’s LUMAWISE Motion Sensor is a motion sensor designed for street lighting. Enabling energy savings from dimming or even turning off a luminaire, while still being able to react to motion and bring a luminaire to full brightness for safety and security reasons. 

Our LUMAWISE ALR series street lighting photocells are ANSI C136.10 compliant photo controls offering an economical and reliable means of controlling lighting systems from dusk to dawn. 

Covers that help achieve an IP66 seal rated lighting control assembly. Available to match our 76 / 80 / 84.7 mm diameter bases and are offered in varying heights and colors for lighting control applications on outdoor roadway, street and area lighting fixtures.

ANSI C136 compliant providing a total power and signal interface between the network control base and luminaire receptacle. The base assembly is available in 76 / 80 / 84.7 mm diameter versions and includes power twist lock terminals, spring leaf signal contacts (C136.41 versions only) and a sealing gasket.

Antennas play a complex role in the dynamics of IoT ecosystems, and as these ecosystems move to support high-density, low latency networks and continue to incorporate various new features into radios and overall system layouts, there is an even greater premium put on antenna system design.

Our push-in wire connectors are insulated wire connectors for electrical installations. These tool-less, poke-in wire splice connectors are suitable for 22-14 AWG solid and stranded wires and are easy to install for retrofit lighting, digital signage, commercial and residential lighting and other wiring system applications.

BuchananSMT Releasable Poke-In Connectors BUCHANAN WireMate 4.0mm pitch modular connector for Wire-to-Board connectivity. The poke-in feature allows for easy and fast installation and its modular design enables a flexible solution.

An LED holder is a circular receptacle or socket that enables a Chip-on-Board (CoB) LED to be mechanically secured, electrically connected and pressed to a heatsink. Our LUMAWISE LED holders remove the need to solder allowing the LED to be directly attached to a heatsink using a 2* M3 screws at a standardized screw-pitch. 

Our unique inverted thru board interconnects enable power delivery from the underside of your PC Boards and LED arrays, eliminating top-surface wire management issues. These lighting connectors are an ideal solution for low profile applications commonly required in solid state lighting LED modules.

The modular design permits the block to be cut into smaller sections without altering electrical properties or product can be molded to length. Models available with ratings up to 600 Volts and 65 Amps and wire from #6 to #26 AWG.

Learn about TE’s connectivity solutions engineered to reduce the complexity of LED streetlight architecture, allowing you to quicken your time to market, reduce applied costs, simplify integration, and improve assembly efficiency.

Discover how TE can help you grow your business through our capabilities in connectors, relays and filters.

Learn more about our Lighting Control solutions that reduce time to market, complexity, and costs by facilitating compact, manufacturable, field-upgradeable solutions.

Learn about how TE can help you bring your indoor lighting designs to light.LEDs provide brighter, longer lasting, and lower-power solutions for continuous lighting.